Skip to content
Free Shipping & Free Design Quote
Free Shipping & Free Design Quote
BLIKA Black Invisible Cable Railing Kit - Extended Version

BLIKA Black Invisible Cable Railing Kit - Extended Version

SKU BL067-L-20-B

$54.99 - $164.99
$54.99
$54.99 - $164.99
$54.99
Package quantity: 20
Product Details

Size：Overall length of the receiver: 1.75", Threaded stud length: 2.98", Thread: 1/4-20. Min length: 3.73", Max length: 4.59", Drill Hole Size = 0.30". The length of the swage dead end: 1.73", Drill Hole Size = 0.21"

Material: Stainless Steel T316 Marine Grade

Hassle-free shopping

30-Day Returns
Not satisfied? No problem! You can return your entire order within 30 days, no questions asked.
Read more

180-Day Warranty
We stand by our products with a 180-day warranty. Give it a try, and you'll see why we're so confident!
Read more

  • 【Applications】For 1/8 inch black deck cable railing system. It's suitable for 4"x4" metal and wood posts and applicable for both level and angled sections. Provided a "dead end" for a DIY black cable railing project, can be used on all sorts of posts in wood or metal. black cable railing kits are perfect for installation on exterior decks, marine rigging, or interior applications.
  • 【T316 Stainless Steel】This black cable railing hardware was made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Suitable for outdoor or indoor.
  • 【Size】4"x4" Black invisible cable railing kits fit for 1/8 inch stainless steel wire rope cable. Overall length of the receiver: 1.75", Threaded stud length: 2.98", Thread: 1/4-20. Min length: 3.73", Max length: 4.59".
  • 【Easy To Install】Black Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These black swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. 1/8" Stainless steel protector sleeves: B091C66ZRV. for stair cable railing, compatible with 5/16" ID Angle Washers: B0BXD6YDLN.
  • 【Package List】20 Pack T316 Stainless Steel 1/8" Black Invisible Receiver and Swage Stud End for 4"x4" cable railing posts. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. We provide professional tool makes your cable railing installation job easier.

Free Shipping
All orders enjoy free shipping within the United States.

Fast Shipping
All orders are shipped from the U.S. within 1-2 days. Typically, delivery takes 2-3 days, meaning you can expect to receive your order within 3-6 days.

30-Day Worry-Free Returns
You can return any unused and undamaged product in its original packaging within 30 days for a full refund.

Free Exchanges
We offer free exchanges within 30 days. You can replace any component without any additional cost, except for the price difference of the product.

Warranty Service
All products come with a 6-month warranty. Any defects or issues due to the product's design or manufacturing (non-human factors) are covered under our warranty service.

Customer Reviews

Based on 6 reviews
83%
(5)
17%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jeffrey H.
Nice Item...

This is about the simplest way to install a cable railing system. Simply drill holes through your posts, crimp on the cable, then feed through the post holes and tighten the holders by turning the ends. These are very reasonably priced, easy to install, and give you a nice clean look. I highly recommend you purchase a hydraulic crimper to securely attach the cables to the receivers. It will save you tons of time and effort. I will be buying more of these in order to complete my installation, and would use them again.

User picture
J
Jacob L.
Works great

They look attractive, are relatively easy to install, and thus far have held up perfectly.

User picture User picture
E
Eric S.
Anyone can install.

Had no problem installing. Used a 1/4" bit and drove into hole with a rubber mallet. One thing I would caution is that these are two pieces threaded together. I'm assuming so you can take slack up from both directions. I made sure these pieces were screwed together tight before installing.

User picture
N
Nicholas H.
As crimp fittings

This product had a little more adjustment.

T
Timothy A.
Great hardware

It's probably more complicated than the more "visible" hardware, but it certainly looks nice. It's pretty easy to install, and looks better with rubber grommets.

Load More